Database updated: 27 October 2026
Safety Information
Medsafe Online Recall Database
Detail of Recall
| Type of Product: | Device |
| Medsafe Reference: | 22734 |
| Brand Name: | Capnostat Sensor for etCO2 |
| Model: | Revision 16 of the Infinity MCable Mainstream C02 (M11.1) |
| Affected: | |
| Software version: | |
| Recalling Organisation: | Draeger New Zealand Ltd Unit 4 24 Bishop Dunn Place East Tamaki Auckland 2013 |
| Contact Information: | 0800 559 186 |
| Manufacturer: | Draeger Medical Systems Inc |
| Brand Name: | Infinity Acute Care System Monitoring - M540 |
| Model: | VG2.2 to VG4.0 |
| Affected: | |
| Software version: | |
| Recalling Organisation: | Draeger New Zealand Ltd Unit 4 24 Bishop Dunn Place East Tamaki Auckland 2013 |
| Contact Information: | 0800 559 186 |
| Manufacturer: | Draegerwerk AG & Co KGaA |
| Brand Name: | INFINITY Patient Monitors & Accessories |
| Model: | VG2.2 to VG4.0. |
| Affected: | |
| Software version: | |
| Recalling Organisation: | Draeger New Zealand Ltd Unit 4 24 Bishop Dunn Place East Tamaki Auckland 2013 |
| Contact Information: | 0800 559 186 |
| Manufacturer: | Draeger Medical Systems Inc |
| Issue: | The manufacturer has determined that when the Infinity M540 Patient Monitor with software versions VG4.1 and below is used in combination with the Infinity MCable Mainstream C02 (M11.1) revision 16 sensor, the Infinity M540 Patient Monitor will reboot if the sensor enters a reduced accuracy mode. Should the Infinity M540 Patient Monitor reboot 3 times within a 10 minute period or less, the Infinity M540 Patient Monitor will go into a fail-state, resulting in a resetting to factory defaults, losing patient settings and stored patient data. |
| Recall action type: | Correction |
| Recall action: | Software to be upgraded |
| Level of recall: | Hospital/Pharmacy/Laboratory |
| Date Commenced: | 21/3/2018 |
